Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Sure!But deleted configuration include serial console baudrate and MAC address of MGMT ethernet port...........IOI 2013/6/25 justinclift <socialmedia@mellanox.com> ** Mellanox Interconnect...
View ArticleRe: Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Did you ever find a way to read the existing EEPROM (not firmware) from a good 9024D-M? Asking because I found this when logged into mine: # pwd/usr/mst/bin# ls -ladrwxrwxr-x 2 root root...
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
I take this back. With further investigation, the "eburn" command seems to write firmware images to an EEPROM. So, it's the same thing we already know how to do. Not much use.
View ArticleRe: Re: Re: Re: ISR9024D-M
Interesting. I'll have to give it a shot tonight when i get home. Thanks
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
I was also tried that in-band firmware burnning and eburn, too. eburn command possible if you can login into your ISR9024 switch with root account. I think eburn is very helpful when if you failed...
View ArticleRe: voltaire 4036 cant connect to CLI
yes I tried to do a factory reset but this did not change anything at all. I am connecting to the CLI using a serial cable and still cannot establish a connection. Any other ideas?
View ArticleInfiniband network in mixed environment (Windows/Linux)
Is it possible/supported to create an Infiniband Fabric in a mixed environment (Windows and Linux machines) such that a Windows machine can communicate with a Linux machine via native Infiband or via...
View ArticleCan I mix 10GigE and IB on an ESXi (v5.1 u1) host?
Just started building our VMware environment. The servers (DL380p Gen8) each have an MT26448 10GigE card installed. I would like to add in a QDR IB card on each server for the backend VMware...
View ArticleRe: Re: Re: ISR9024D-M
Well, here is some good news. I took one of the Vm servers off the network, connected it to the IB switch using the CX4 cable and now i can ping 192.168.2.9 but when i try to ssh to it, i get nothing...
View ArticleRe: Re: Re: ISR9024D-M
Sweet Im in and able to manage the switch vi the infiniband connection. The issue was that one of the nics on the box has the same subnet as the switch (192.168.2.x). The SM on the switch itself is...
View ArticleRe: Infiniband network in mixed environment (Windows/Linux)
Thanks a lot! This answer was exactly what I was looking for. Von: justinclift Gesendet: Mittwoch, 26. Juni 2013 00:49An: Wolfheimer, FelixBetreff: Re: - Infiniband network in mixed environment...
View ArticleClik here to view.
Re: Infiniband network in mixed environment (Windows/Linux)
Yes, this is completely possible and also reasonably common. IP over IB (IPoIB) is well supported in several OS's, including Linux (Red Hat/CentOS/SL/Debian/etc), Windows, VMware ESX, and Solaris....
View ArticleRe: voltaire 4036 cant connect to CLI
4036 console cable line order is different with Broadcom, Cisco.I found D-Link serial console cable is compatible with 4036. If you can purchase the serial DB9 to RJ45 connector check below. 1. Your...
View ArticleRe: vSphere 5.1 U1 IPoIB VLAN support
Hi inbusiness,The way of VLAN configuration for IPoIB on vSphere 4.x/5.x didn't change.I suspect that you may have the wrong configuration on 5.x. Can you please provide more information.- Subnet...
View ArticleRe: Getting eIPoIB to work ?
Hi drolfe,I'm trying too to get eipoib to work on ubuntu 12.04. In the end, did you succeed to have eipoib working? Can you add your infiniband hca as an interface for a bridge device? I'm stuck in...
View ArticleRe: vSphere 5.1 U1 IPoIB VLAN support
* Here it is...------------------------------------------------------------------------------------------------------------------~ # esxcfg-vswitch -lSwitch Name Num Ports Used Ports Configured...
View ArticleRe: voltaire 4036 cant connect to CLI
Yes, You're right~! Push the reset button for long time that just revert admin password to default "123456". I was confused. To: justyk31011 I'm so sorry for my mistake...I think that you must get a...
View ArticleRe: IPoIB not working on Windows 2008 r2 - need help
On you initial posting you mentioned something around..."ping is working for few seconds and then stops" and then you also mentioned that you CAN see it in your Ethernet network and your (other IP...
View ArticleGetting dual ConnectX EN adapters (MNPH29B-XTC) to work
Hello all, I picked up a few Connect-X EN MNPH29B-XTC adapters but running into some issues. I am trying to install 2 of these into my storage server but one of them seems to work at a time. If I...
View Article