Docs for older Voltaire gear?
Would Mellanox be ok to put the docs online for the (EoL) products of companies they've bought? eg User Guide, Installation Manual, Release notes, (etc) Asking because I've finally just picked up a...
View ArticleSX60xx vs SX10XX both VPI ?
What's the difference between the infiniband sx60xx with vpi support and the ethernet sx60xx with vpi support,can they all support ib to en gateway ? I'm not seeing the sx6025 has vpi support?
View ArticleRe: SX60xx vs SX10XX both VPI ?
On second thought I guess the sx60xx switches wouldn't have any native ethernet ports ?
View Articlediff between mthca and mlx4 drivers
wondaring why there are two drivers ?are they independent of each other ?which firmware/hca onwards mlx4 is intended for ?
View ArticleRe: SX60xx vs SX10XX both VPI ?
Hi Drolfe, Currently only the SX6036 and SX1036 support the gateway feature.The SX6025 and SX6018 which are externally manged models ( no on-board cpu) are not supporting VPI as they can't run ethernet...
View ArticleRe: SX60xx vs SX10XX both VPI ?
Thanks for that, can you connect 10 gig ethernet to sx6036 or only the sx6036 ? Also what about the new sx1012, does it support the gateway function?
View ArticleRe: SX60xx vs SX10XX both VPI ?
you can work with 1/10/40 on the SX6036 ( ethernet port) and SX1036.Regarding the SX1012 and GW - it should have the feature later this year/start of 2014. we will notify about such supported features...
View ArticleRe: Docs for older Voltaire gear?
Hi!Give me a email.I was found some documents via googling.I'll reply you with documents of ISR9024D-M.
View ArticleClik here to view.
Re: Help for hardware decisions
Hi Sven, See some answers below to your questions: 1. If you plan on deploying a non-blocking cluster of up to 36 nodes, the SX6036 should be fine. However if you already know you would exceed this...
View ArticleRe: diff between mthca and mlx4 drivers
Thnx Alione more questionhow these connectX cards majorly difffers from InfiniHost, is it XRC support OR VPI support OR something else
View Articlesame card as with-mem and mem-free
HiCan same card (with-mem) can be used as memfree card by changing firmware.is driver code needs to be changed OR it is trasparent to driver
View ArticleRe: mlx4_vnic
Hi Ali, I obviously missed that part of the release notes, maybe because the Release notes in the Ubuntu package does not contain that part :-) Any ETA when it be supported? We are needing it for...
View Articlesame driver for with-mem and mem-free cards
Does this same stack (MLX-OFED / OFED) works for with-mem and mem-free cardswhere is actually distinction between them in the code
View ArticleRe: same driver for with-mem and mem-free cards
Out of curiosity, why do you keep asking the exact same question in multiple places? It doesn't help.
View ArticleRe: Are the Community Rewards actually available?
That is strange. I did not get a notification. Let me look into the system and see what is going on. Let me send you a PM and will get something sent out to you right away.
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hi, I am sure that it is doable but unfortunately i don't have access to such switch and these things aren't documented anywhere. it will take some common sense with zero documented knowledge to get...
View ArticleRe: Can ping but not connect to ports using infiniband
no switch..?? it could make things much more simple for you
View ArticleClik here to view.
Re: Can anyone point me to a good example of using "iperf" with Mellanox...
Good question deserves a good answer: i would start with recomending using MellanoxOFED2.0 - the guys in the shop have been working very hard on performance improvements for ipoib and Ethernet as...
View Article