Re: Very stupid MHGH28-XTC question
Hi~ If you have a ConnectX-2 VPI firmware above 2.9.8350 then you can use it!If Mellanox support ConnectX-2 EN INTERIM firmware you can use it on WS2k12. Good luck!
View ArticleClik here to view.
Re: Mellanox positioning in the IB market?
Henry, in regards to stock price, we can't comment on such matters.
View ArticleCan anyone point me to a good example of using "iperf" with Mellanox Ethernet...
Hi, I have a setup with a Mellanox SX1036 Ethernet switch and 2 servers, each with Mellanox ConnectX-2 HCA cards. Each HCA card has one of its (Ethernet) network ports connected to a port on the SX1036...
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
I'm succeed In-Band Firmware update and my 4036 doesn't report firmware problem anymore..... But console wasn't come back. I think that there is a some of initial configuration was corrupted. If I use...
View Articleerror upgrading firmware version
i am upgrading firmware version for my InfiniHost III EX MT 25208 card from 4.6.2 to 4.8.200 . on command : "mstflint -d 10:00.0 -i fw-25208-4_8_200-MHEL-CF128-T.bin bmstflint -d 10:00.0 -i...
View ArticleClik here to view.
Re: Can anyone point me to a good example of using "iperf" with Mellanox...
Branko, Thanks so much for the question. Let me see who I can get to jump on this for you.
View ArticleRe: Re: Very stupid MHGH28-XTC question
Ugh, the Jive commenting system seems to be messing up the formatting of the above post. It looks fine in the advanced editor, but is screwy when actually displayed. The info in it is still all...
View ArticleRe: Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
This is very interesting. I haven't picked up my switch yet, hopefully next week. As a thought, with the Mellanox adapter cards it's possible to customise their behaviour when burning/creating...
View ArticleRe: error upgrading firmware
Hmmm, that "N/A" for the "Current FW version on flash:" is a bit worrying. Next thought, is that command you're quoting correct? It kind of looks like you've doubled up the options or the command or...
View ArticleRe: mlx4_ib: Unresolved symbol
Hi Andy, Are you using Mellanox OFED, or the CentOS 6.4 supplied Infiniband drivers? If you're using Mellanox OFED, are you sure you need to? Asking because the easiest way for new Infiniband users...
View ArticleRe: Can ping but not connect to ports using infiniband
Yeah, as Yair Ifergan mentioned, don't connect port 0 to port 0, then port 1 to port 1. If you're connecting two boxes directly to each other, connect both of their port 0's to port 1 on the other. eg...
View ArticleRe: Infiniband on Linux... defaults to datagram mode somehow?
Sorry for the delay, I was travelling internationally, but am back home now. I've just spun up RHEL 5.x in a VM locally to see where things are installed. It looks like Infiniband support on RHEL 5.x...
View ArticleRe: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hi!I was test all command for my corrupted old InfiniScale III switch Voltaire ISR9024D-M.Latese MFT 3.0 for Linux and Windows edition doesn't support it anymore. And I was build old CentOS 5.2 (with...
View ArticleRe: Very stupid MHGH28-XTC question
Hi Justin Many thanks for the detailed information - really appreciated. I really need my primary machine running under Windows so I guess I need to mess around with W2K8R2 (but its a shame if I have...
View ArticleRe: Can ping but not connect to ports using infiniband
Thanks. After a clean install with Ubuntu 13.04 and Mellanox OFED 2.0.5 I was able to get pinging working. When I try to run OpenSM on the second port with the port 0 to port 0 and port 1 to port 1...
View ArticleClik here to view.
Re: help for ibping and ibv_rc_pingpong over switchless configuration
It turned out to be something funny with Ubuntu 12.04 Desktop. A clean install of Ubuntu 13.04 Server with MLNX_2.0.5 seemed to get everything working off of one port. With 2 ports in a configuration...
View ArticleRe: help for ibping and ibv_rc_pingpong over switchless configuration
The cross-over cable thing should help with this. It's because opensmd will only attach to (and use) one port on a server. By default it attaches to the first port of the first card it finds. Port 0...
View ArticleRe: help for ibping and ibv_rc_pingpong over switchless configuration
If you mention that netperf and ping is working over the 2nd port then I guess you took care of a second opensm instance running on the B2B link. For iblinkinfo to work, try:iblinkinfo -P 2
View ArticleClik here to view.
Re: MLNX-OS Questionaire
Out of curiosity, is there any way you guys could put all of the older Mellanox software and manuals online (with appropriate index) instead of just the latest stuff? That would it make things much...
View ArticleClik here to view.
Re: Mellanox (old Voltaire) ISR9024D-M recover flash area
Hi~ Yairi~ I think something about firmware update logic.If firmware location address and boot up configuration (include console buadrate, etc) location address is different on EEPROM, What can I do?...
View Article