Re: Getting eIPoIB to work ?

Unfortunately I have an Infinihost device with chipset MT23108..

From release notes I understood that it is deprecated from mlnx 1.5.3 onward ... see below release notes for 2.0, 1.5.3 and 1.5.2

Does anyone know if inifinihos MT23108 are really really unsopported after 1.5.2?

What can I do to make eth_ipoib work with infinihost devices?

Thanks,

Giovanni.

===============================================================================

http://www.mellanox.com/related-docs/prod_software/Mellanox_OFED_Linux_Release_Notes_2_0-2_0_5.txt

MLNX_OFED_LINUX 2.0 supports the following adapters:

  - Mellanox Technologies HCAs:

  - ConnectX-3 (Rev 2.11.0500 and above)

  - ConnectX-2 (Rev 2.9.1200 and above)

  - Connect-IB (Rev 10.0.2400 and above)

===============================================================================

http://www.mellanox.com/related-docs/prod_software/Mellanox_OFED_Linux_Release_Notes_1_5_3-4_0_35.txt

Mellanox supports the following adapters with MLNX_OFED_LINUX 1.5.3:

  - Mellanox Technologies HCAs (SDR and DDR Modes are Supported):

  - ConnectX-3 (fw-4099 Rev 2.11.0500)

  - ConnectX-2/ConnectX-2 EN (fw-ConnectX2 Rev 2.9.1200)

===============================================================================

Mellanox supports the following adapters with OFED 1.5.2:

   - Mellanox Technologies HCAs (SDR and DDR Modes are Supported):

     - InfiniHost(R) (fw-23108 Rev 3.5.000)

     - InfiniHost(R) III Ex (MemFree: fw-25218 Rev 5.3.000

                         with memory: fw-25208 Rev 4.8.200)

     - InfiniHost(R) III Lx (fw-25204 Rev 1.2.000)

     - ConnectX(R) and ConnectX EN (fw-25408 Rev 2.8.0600)

     - ConnectX-2 (fw-ConnectX2 Rev 2.8.0600)

     - ConnectX-2 EN (fw-ConnectX2 Rev 2.8.0600)

Note: InfiniHost adapters will be deprecated in the next MLNX_OFED release.