Re: ib_ep.c:297 MXM ERROR failed to create address handle: Cannot allocate...
Enable IPv6 support on the hosts by running command: echo 0 > /proc/sys/net/ipv6/conf/enp131s0/disable_ipv6
View ArticleRe: ib_ep.c:297 MXM ERROR failed to create address handle: Cannot allocate...
ipv6 is already enabled for the hosts.
View ArticleRe: ib_ep.c:297 MXM ERROR failed to create address handle: Cannot allocate...
Opir, does MXM work with ROCE? Our setup at University of Houston is ROCE. I beginning to suspect that MXM is strictly meant for infiniband protocol, any taughts before I formerly engage the support...
View ArticleRe: ib_ep.c:297 MXM ERROR failed to create address handle: Cannot allocate...
Please, e-mail me and let's continue via e-mail.
View ArticleRe: can not download MLNX_OFED_LINUX-1.5.3-3.1.0/3.0.0-rhel6.1
Hello, The link was broken - sorry for that. Please use the following : http://www.mellanox.com/downloads/ofed/MLNX_OFED_LINUX-1.5.3-3.1.0-rhel6.1-x86_64.tgz
View ArticleRe: ib_ep.c:297 MXM ERROR failed to create address handle: Cannot allocate...
MXM use VERBS in order to transfer packets over Ethernet.
View ArticleConnectX-3 Pro BSD driver build fails
I am trying to install a ConnectX-3 Pro in a BSD system. I rebuilt and installed the new kernel but when I try to build the modules I always fail the "make && make install" - for the mlx4...
View ArticleDoes FCA or other accelerators work with RHEL6u4 or RHEL6u6 OFEDs?
Hello, I was wondering if FCA or other accelerators work with RHEL6u4 or RHEL6u6 OFEDs? Are there any issues to watch out for or is some functionality not available with the RHEL OFEDs but it is with...
View ArticleClik here to view.
Re: 4036E software update
After some more searching I found the solution to this issue is to update the software to version 3.62 and then to 3.91-987. In my case I was able to skip the other versions in between. I had to...
View ArticleClik here to view.
MLNX_OFED_LINUX-1.5.3-3.0.0 kernel error.
Hi friends, Can anybody explain me the exact reason for the kernel error "kernel: ib0: failed to send RTU: -22" ? Thanks.
View ArticleRe: MLNX_OFED_LINUX-1.5.3-3.0.0 kernel error.
Hi, It can be normal under certain heavy traffic load scenarios. Every so often, connections get closed due to RNR NAK timeouts. When a connection is closed it will be re-opened when traffic needs to...
View ArticleRe: MLNX_OFED_LINUX-1.5.3-3.0.0 kernel error.
Thanks a lot Erez Ferber.In our case, it's causing HPC job slowness issue /job failure.Is it possible to avoid such kind of error/issue?
View ArticleClik here to view.
supporting 1000base with a connectx-3
Hello all, I am still learning the ropes with these cards so hopefully I include the right details. the card in this server is: # mstflint -d 42:00.0 qImage type: FS2FW Version: 2.32.5100FW...
View ArticleRe: what is the reason for below ib error,
Hello, I'm not sure the background of that issue and the point where that is happening but this article may help you.dev_queue_xmit Thanks,Masahiro
View ArticleDoes MLNX_OFED also support FreeBSD?
We want to implement IO virtualization over InfiniBand, For this we need to have following system requirement:• MLNX_OFED Driver• A server/blade with an SR-IOV-capable motherboard BIOS• Hypervisor that...
View Articlehow to get a (full) shell access?
hello there!i got a sx series switch (Ethernet Switches) and a particular (Virtualization for Infiniband and Ethernet) use-case demands that a full shell be accessible to download (inject) certain...
View Articlehca_self_test.ofed: Firmware Check on CA #0 (VPI) .......... FAIL:REASON:...
I am a new user of Infiniband. After installation of Mellaxon_OFED by default, I run the hca_self_test.ofed, and I got the information as follow: root@gpu-cluster-4:/usr/bin# hca_self_test.ofed ----...
View ArticleRe: how to get a (full) shell access?
Hi Girish, Can you share the use case mentioned in your question? It's not possible to get bash access to the switches.
View ArticleRe: how to get a (full) shell access?
thanks very much for following this up! my use-case is of SDN. we've a lightweight controller agent, that can be dispatched on a switch itself, to double it as a controller. we've been testing this...
View Article