Re: Re: Configuring iSER target using Mellanox MT26448 (ConnectX2) card
ib_send_bw is script that is part of testperf package (you should have it with the installation of MLNX_OFED).When using this script, you can test the bandwidth of the link between the servers.there...
View ArticleClik here to view.
Re: Windows: Network cable unplugged
Subnet manager is the control plane of the fabric. It assigns addresses (L2 LID address) and establishes routing tables. It will assign a Layer 2 identified, not an IP address. If the port is active,...
View ArticleClik here to view.
Different types of cables
Hi all, Can somebody write down what is the difference between MC2206130 and MCC4Q28C REV B0 cables?I can see the MCC4Q28C's connector is much longer than MC2206130's but is there any other functional...
View ArticleProblem with update the new image file into MSX6000MAR PPC460 management module
Hello all! Our company have obtained mellanox switch with two management modules MSX6000MAR PPC460. The problem is that the 2nd mgmt module has a different software version installed (3.3.4402) and...
View ArticleRe: Problem with update the new image file into MSX6000MAR PPC460 management...
Hi Yuri, Please check the md5sum of the .img file, it should be:2be840eb0a34b314d45a92a6cc2351dc image-PPC_M460EX-SX_3.3.5006.imgAnd if not the same please re download the .img file from the support...
View ArticleRe: UFM 4.0 GUI hangs in "Initializing ..." state
Hi Ricardo, Did you manage to overcome the issues?
View ArticleClik here to view.
Re: MTS2400-24 missing management board
Hi Danny, MTS2400-24 is a Flextornics OEM switch. I would like to advise you to contact Flextronics representatives: Michael.Dolkin@il.flextronics.comTomer.Fridman@il.flextronics.com You can also refer...
View ArticleRe: Problem with update the new image file into MSX6000MAR PPC460 management...
Hi Eddie, After downloading the image for the second time, we have solved our problem. Thank you for you help! Mon, 22 Sep 2014 23:44:01 -0700 от "eddie.notz"...
View ArticleClik here to view.
Re: Windows VMs hang out NFSoRDMA on CentOS 6.5
Sorry for no answers - thought the question was ignored and lost the link .The model of the Intel IB-cards is AXX1FDRIBIOM as i've researched. As an update - the NFSoRDMA hangs not only with Win VMs,...
View ArticleProblem adding kernel support on XenServer
I've encountered a problem while adding kernel support to the latest MLNX_OFED-2.3-1.0.1. I downloaded the latest version (MLNX_OFED_LINUX-2.3-1.0.1-xenserver6.x-i686, checked both: iso and tgz) from...
View ArticleRe: Problem adding kernel support on XenServer
hmm, I am assuming you are running as root? Do you have any weird permissions on /mnt/ that would prevent rpm from executing?
View ArticleCONNECT-X works on ESXi5.x?
Yes I know Connect X 'officially' has not been supported on ESXi5.x acoording to VMware: Firmware - Driver Compatibility Matrix.http://www.mellanox.com/page/vmware_matrix?mtag=vmware_drivers but I...
View ArticleClik here to view.
Re: Problem adding kernel support on XenServer
Hello, David You are correct, I am running as root. There should not be any weird permissions that I can think of. I have "no_root_squash" set in export options of the mount. I did check that I can...
View ArticleTrying to setup eIPoIB in order to use IB interface from a VM
I was following theeIPoIB Manual Configuration guide in order to set up the ib interface as the main data interface for a VM. I followed the guide quite closely except for the fact that after setting...
View ArticleRe: Different types of cables
MCC4Q28C is old cable and does supports SDR, DDR, QDR and 10GigEMC2206130 is alternative to MCC4Q28C and supports QDR, FDR10 and 40GigE
View ArticleClik here to view.
Re: CONNECT-X works on ESXi5.x?
Hello, I followed this doc a week ago, it still works. http://www.bussink.ch/?p=1306 make sure you have firmware 2.7 or lower on the cards. --Rick
View ArticleNot able to build lustre 2.5.0 against OFED 2.2.
Hi, I am trying to build lustre 2.5.0 against OFED but not able to compile lustre with OFED. My CentOS version is 6.4, So I downloaded MLNX_OFED_LINUX-2.2-1.0.1-rhel6.4-x86_64.# cat /etc/issue CentOS...
View ArticleRe: Not able to build lustre 2.5.0 against OFED 2.2.
Below patch solved the problem.http://review.whamcloud.com/#/c/8451/1 Thanks,Aayush.
View ArticleI can't find the firmware of the PSID SM_2091000001000 on your website
I can't find the firmware of the PSID SM_2091000001000 on your website. The infomation of the device is listed as below:02:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s -...
View ArticleRe: I can't find the firmware of the PSID SM_2091000001000 on your website
Hi Ning Li, The PSID indicates that it's an on-board SuperMIcro HCA, you should contact SuperMicro to get the latest Firmware for that LOM device. Please provide them the PSID and the server model
View Article