Re: Factory Reset Voltaire ISR9024m without console access?
I'll have to try that on mine. I hooked mine up to wireshark and saw tons of strange IPs. How did you find that up out? Sent via the Samsung Galaxy Note® 3, an AT&T 4G LTE smartphone
View ArticleClik here to view.
Re: Factory Reset Voltaire ISR9024m without console access?
I hooked directly up to it via wireshark, and while the capture was started, power cycled the switch. Look for a "Gratuitous ARP" entry - thats its IP.
View ArticleRe: Factory Reset Voltaire ISR9024m without console access?
I tried that, but the IP address is always the one for the workstation running wireshark..it's something like "who has this address, tell 0.0.0.0. Which I think means it's disabled. In going to try...
View ArticleRe: el5.10 ofed build problem.
Hi Jubilex, Can you explain what you did in bit more detail? I tried to do what you did. But config.mk keeps changing back and so I'm not able to remove the conflicting definition. Thanks in...
View ArticleRe: Factory Reset Voltaire ISR9024m without console access?
Did you try press the reset button during 30 seconds?Some mellanox switch can reset the password to default by this method.
View ArticleClik here to view.
Re: Factory Reset Voltaire ISR9024m without console access?
Did not try that. Someone else mentioned holding in the reset button during power-up.
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
:-( We need you Justin!
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
Yair IferganI tried the password reset function uboot menu and it worked, but the first unit logsme out of the console after password change and even if I try to relogin it kills the login processso...
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
First unit - I checked inside of the unit and there is no loose wires or anything. All the port leds are lit on the system and I get the Empty Flash during reboot processand when I try to login it logs...
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
Hi Joe,I wouldn't get my hopes high on the first unit. I might be wrong but this is what I am thinking: the fact that all LEDs are on is probably because the switch ASIC is stack in reset.the UMAD port...
View ArticleRe: Need help on openstack mellanox quantum plugin
Hi Nishant, Mellanox plugin supports two types of VF provisioning:pci passthrough (hostdev) - SR-IOVmacvtap (mlnx_direct) - Para Virtualization According to the log, you want to use the first flavor...
View ArticleRe: el5.10 ofed build problem.
It's a bit involved... you end up having to repackage the SRPMS in MLNX_OFED_SRC so that you can run mlnx_add_kernel_support.sh. I cannot remember all the steps. Here is a tarball of the modified...
View ArticleRe: Where to source low profile pci brackets.
Interestingly, I have some low profile brackets from mine, and I need full height brackets. Recently gained access to a 3D printer, so was going to attempt modelling and printing some... but if you...
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
Let me know if/when the phishing-like emails have stopped. Until then, no.
View ArticleRe: Where to source low profile pci brackets.
If you still need low profile brackets for the MHGH28 or MHGH29, I did get a bunch fabricated and have them available to sell. Feel free to PM me. Figured to help rebuild the stock so that others can...
View ArticleClik here to view.
Corrupt Voltaire 9024-m firmware help?
You may have seen all my issues with this switch, but I was unable to access it via the fabric, and I finally got the serial console cable working, it turns out either my serial ports are bad or...
View ArticleRe: IS5023 compatibility question
Hi, The IS5023 is infiniband .CX313A- is Ethernet, for full information see User...
View ArticleRe: Mellanox Voltaire 4036 VLT-3011s way to reflash OS / reset password
Working on it with my social media people.Can you send me an example for a more recent one?
View ArticleRe: OFED version support on mixed environment
The answer would be: it shouldn't make a difference. The IB spec mandates all devices to be backward compatible with all speeds. OFED 2.0 probably does not mention previous speeds because they never...
View ArticleRe: Factory Reset Voltaire ISR9024m without console access?
If you are trying to make your own cable, cross pins 2 and 6. Or, use two RS232 to RJ45 connectors with Eth cross cable in between. should work..
View Article