Re: Esxi drivers
Hi!Multiple IPoIB uplink function enable hardware based network isolation. That's a simple and rock solid.Just configure port count and reboot each host then I'm always use 16 virtual ports to virtual...
View ArticleClik here to view.
9.2.4002 switch firmware is released on Mellanox.com
In order to download the latest version, visit Mellanox.com on this page http://www.mellanox.com/page/firmware_table_SwitchX Ophir.
View ArticleRed Hat Fan? Planning to Install Red Hat Enterprise Linux OpenStack?
Check out Mellanox Reference Architecture Guide for Red Hat Enterprise Linux OpenStack Platrom http://mellanox.com/related-docs/applications/Mellanox-OpenStack-Solution-for-Red-Hat.pdf...
View ArticleRe: Suggestions for *quiet* Infiniband switch?
I purchased a 9024 SDR two weeks ago for $400, and it has the Ethernet port and is manageable (yet it doesn't have a Subnet Manager).Having seen the blazing fast 10Gbps SDR links, I want something that...
View ArticleClik here to view.
Re: About connecting CX2 to CX3
The first question I ask is where is your Subnet Manager running. Even back to back connections need a subnet manager. If you are running Linux on both hosts - go to one host and...
View ArticleRe: Voltaire 9024S-M / Windows 2012 R2 / Mellanox MHGH28-XTC
Hi,It seems like your IB fabric is running and working.Need to check how did you configure IPoIB, since you say IP is not workingDid you try following the WinOF user...
View ArticleRe: What level of noise is in the switch MSX1012B-2BFS SwitchX ?
Hi,In the switch's user manual there is a char regarding the Acoustic's, the switch Acoustic:ISO 777971dB(A)ETS 300 753 SX1012 User Manual (page...
View ArticleRe: What level of noise is in the switch MSX1012B-2BFS SwitchX ?
Thank you so much!![?] 2013/11/11 rian <socialmedia@mellanox.com> Mellanox Interconnect Community<http://community.mellanox.com/?et=watches.email.thread> What levelof noise is in...
View ArticleMellanox SX6036 with MC2207310-003 and ConnectX-3 MCX354AFCBT?
It seems that all other lengths are listed as compatible in the "Mellanox Products Approved Cable Lists", but for some reason the 3m cable is omitted. Is this an oversight or is there a reason the 3m...
View Articleinfiniband under windows server guest on XenServer 6.2
I'm trying to get infiniband to work under my Windows Server Guest OS under XenServer 6.2. I installed latest MLNX_OFED in dom0 according to this instruction...
View ArticleRe: SR-IOV issues with Mellanox CX-3 with RH6.4 KVM
Hi Rian: Yes I did. I just got some feedback from RH support and it looks like there was a bug with the kernel I'm using against Mellanox and its been resolved in a later kernel. I'm upgrading now....
View ArticleConnect-X 3 cards on RHEL 5.3
Hello , I need to install Connect-X 3 cards on an HPZ800 system running RHEL 5.3, kernel 2.6.18-128.el5. Unfortunately I cannot update the kernel to a higher version due to application dependencies ,...
View ArticleRe: Voltaire 9024S-M / Windows 2012 R2 / Mellanox MHGH28-XTC
Thank you for the reply. Yeah, I did look into the documentation. After reviewing I'm still under the impression that the NICs in Windows network connections, should still show connected with out any...
View ArticleRe: SR-IOV issues with Mellanox CX-3 with RH6.4 KVM
Hi Rian: I'm happy to say that upgrading to a newer RH kernel, the VM is now working and I do see the Mellanox device from the VM. However, I have more questions. I have 4 VFS devices mapped on the...
View ArticleClik here to view.
Re: VM Passthrough of MHQH19B-XTR
It's "LSI Logic Parallel". It is strange as I thought it should support CX-2 out of box but turns out not... Now the link is successfully established but I see there's a large latency, i.e. 600-2000ms...
View ArticleRe: ConnectX-3 EN SR-IOV guest driver for KVM
Thanks rian, that helps. I made the host to be Centos 6.4(basically RHEL 6.4) then installed OFED driver on it and with any guest it works with just default mlx4_en driver. Seems like driver...
View Article[SOLVED] ConnectX-3 EN SR-IOV guest driver for KVM
1. I was able to get the SR-IOV on the host(Debian Wheezy) to show Virtual Functions following:Mellanox OFED Driver Installation and Configuration for SR-IO2. Then opened virt-manager and assigned one...
View ArticleConnectX-3 EN SR-IOV: number of physical functions with OFED driver
I have SR-IOV working with both Mellanox ConnectX-3 and Intel 82599EB. I noticed a difference in the way SR-IOV driver works with both of them:Let x be the number of physical ports.Let y be the number...
View ArticleRe: Vmware ESXi 5.1 & ConnectX SRP Support
I was found ConnectX-1 firmware above 2.9.1000.I was also tested firmware 2.9.1100, 1200, 1309(?) for ConnectX-1 successfully...( It doesn't need disable disable Intel vt-D on BIOS!)
View ArticleRe: Vmware ESXi 5.1 & ConnectX SRP Support
What's your exact CX-1 HCA model?If your CX-1 HCA is original from Mellanox, I'll mask a firmware from raw image for you...
View Article