Clik here to view.
Re: Windows Server 2012 and ConnectX cards..drivers?
Hi! Can you try the procedure on 78 page? Here is a link. Good luck! http://www.risingtidesystems.com/doc/RTS%20OS%20Admin%20Manual.pdf
View ArticleRe: How do I recreate 100Gb connect IB performance claims?
Yes that is the case. I ran a simple rdma_bw test to measure the bandwidth. One client server pair was targeting port 1 and another client server pair was targeting port 2. They used 65kB message sizes...
View ArticleRe: How to read /proc/interrupts?
I understand the multiple interrupt channels are to provide better concurrent performance as you suspect. In my experience using them has not been straightforward. I am not sure how some of the OFED...
View ArticleRe: Link up delay above QDR switches..
I have seen delays getting the links up on our systems. I have not investigated it since it is not an issue. Have you tried adjusting any of the subnet manager configurations? I assume that you have...
View ArticleClik here to view.
Re: Link up delay above QDR switches..
I'm also tried adjust sweep time in my SM configuration.But getting the link-up delay was exist. There is not a link-up delay that I was change the switch to DDR switch with SM.(I have some hybrid...
View ArticleRe: Windows Server 2012 and ConnectX cards..drivers?
I did try, but I downloaded the mellanox 3.1 drivers which are only for server 2008r2 and they say "this is not server 2008" and don't install. If they're talking about the openfabrics distribution,...
View ArticleRe: Windows Server 2012 and ConnectX cards..drivers?
Hi!You must use OFED driver.You can extract OFED package some folder and you can install that driver manually...:) from my iPhone 2013. 9. 5. 1:33 "michael.blanchard" <socialmedia@mellanox.com>...
View ArticleClik here to view.
Sharing connectx IPoIB cards with windows server 2012 guest VM
Is there a trick to this? I thought you could just add it to the virtual switch, but apparently the guest VM traffic isn't routed across the infiniband fabric. I can ping the host machine, but no...
View ArticleQUES: is there a ConnectX-2 VPI MLNX_WinOF package for Windows 8?
Subject says it all. TIA. John TrebleOttawa, Canada
View ArticleRe: Sharing connectx IPoIB cards with windows server 2012 guest VM
Doing some more research, this seems to be an issue with IPoIB not wanting to be bridged, only NAT'd which vmware supports but not hyper-v, and my only option is network virtualization with SCVMM. Is...
View ArticleRe: Windows Server 2012 and ConnectX cards..drivers?
I have also tried to get Windows 2012 and SRP working. I ended up reverting to Windows 2008 R2 and using a ConnectX-2 card and did successfully get this to work using the OpenFabrics drivers.
View ArticleClik here to view.
Re: Windows Server 2012 and ConnectX cards..drivers?
At this point, had I realized the time and expense and issues with infiniband, I would have stuck with iSCSI!!! ugh!
View ArticleRe: QUES: is there a ConnectX-2 VPI MLNX_WinOF package for Windows 8?
The driver is available on our website. Please visit: www.mellanox.com/page/products_dyn?product_family=32&mtag=windows_sw_drivers. For more information, please visit our Technical Support space:...
View ArticleRe: QUES: is there a ConnectX-2 VPI MLNX_WinOF package for Windows 8?
Sorry, what am I missing here? I see references on the web site and in the release notes (e.g., 4.40 ...) to:Windows Server 2012Windows Server 2008Windows Server 2003Windows 7Windows XP Nothing for...
View ArticleRe: QUES: is there a ConnectX-2 VPI MLNX_WinOF package for Windows 8?
Apologies! I left out part of the answer from our support team: You would use the information for WinOF 4.40 support Windows 2012 Server (AKA Windows 8) on ConnectX-2.
View ArticleRe: QUES: is there a ConnectX-2 VPI MLNX_WinOF package for Windows 8?
Thanks for your reply. Windows 2012 Server is AKA "Windows 8 Server" (i.e., not "Windows 8"). Can you please confirm that I can use MLNX WinOF VPI v4.40 (for x64) and the same firmware baseline for...
View ArticleIs there a way to disable 802.3 framing, mainly the FCS check on windows...
Is there a way to disable 802.3 framing, mainly the FCS check on windows machine when using connectx-2 cards in the 10 gigabit ethernet mode. I am connecting 2 PCs back to back using the QSFP...
View ArticleRe: New to infiniband, can't get a working connection.
driver for win2012 and/or 2008:http://www.mellanox.com/page/products_dyn?product_family=32&mtag=windows_sw_drivers BTW, Windows2012 server should be the first Windows to come with an "inbox" driver...
View ArticleClik here to view.
Re: New to infiniband, can't get a working connection.
Yes, but it apparently doesn't support the old connectX card. Right now i'm using the 4.2 driver to get things working. So i'm using iSCSI over IB, since I'm unable to get SRP to work with 4.2.
View Articlesx6036 capabilities
Trying to figure out how to manage a north-south IB to Ethernet scenario (i.e. IPoIB to IPoEther) using the mellanox SX6036 contra the older 4036E.As far as I can see, the SX6036, with proper...
View Article