Re: how to use sample control for port counters
Hi Serge, We used perfquery to query Infiniband port counters but I am not aware of any documentations that implement sampling control for IB ports.Which counter specifically were you referring to for...
View ArticleIs there an alternative to "ip igmp snooping querier" when stuck with...
I have two hosts, ethernet 1/5-1/6, and no router. The "querier" option looked promising until I found it unavailable, so I'm back to having no apparent way for my join and leave frames to have any...
View ArticleRe: Is there an alternative to "ip igmp snooping querier" when stuck with...
Suppose I compose an IGMP query from the sender and respond to it from the receiver. Will that get around the inability to configure the switch as the IGMP querier?
View ArticleRe: Is there an alternative to "ip igmp snooping querier" when stuck with...
Apparently, but it was worth a shot while waiting for my correction to the nearly illegible serial # to receive the response that the incorrect one never did and (hopefully) give me access to download...
View ArticleRe: Is there an alternative to "ip igmp snooping querier" when stuck with...
Correction: That was supposed to read "Apparently NOT."
View ArticleRe: Is there an alternative to "ip igmp snooping querier" when stuck with...
OK, suppose I do eventually get the image... How does the switch know what multicast group(s) to query for, since it's not part of the configuration? Or does it wait until a multicast message comes...
View ArticleClik here to view.
Re: MLNX-OFED-ESX-2.3.3.1 - Where is a Storage protocol support?
driver 2.3.3.1 works great!I want another option that SRP! How can I install SRP vib on vSphere OFED 2.3.3.1?
View ArticleClik here to view.
Re: how to use sample control for port counters
Hi Sophie Naudin I'm interested insamplingmode. It's docemented in OFED man "perfqery -c, --smplctlshow port samples control".As I see it, each device (in this mode)shouldselecttics andinformation on...
View ArticleRe: mellanox u-boot command prompt password
no matter what is the issue - uboot won't help. Can you provide more details what exactly you did?how did you re image? You've installed 3.3.4304 or 3.4.3002 I see you are getting Console prompt so...
View ArticleRe: ConnectX4 and SRIOV : supporting VL ?
Hi Vishal, Sorry I was out of office since your answer.Thank you for the clear answer. Do you know if there is any plan to get VL support with SRIOV on connectX4 ? We actually use that feature with...
View ArticleNewbie question to infiniband: Stuck with IS5022Q shutting off during...
Hello, I just acquired the following [used] switch: P/N MIS5022Q-1BFR Rev:A5 Within a few seconds from plugging in and showing green for both system and fan LEDs, the switch shuts itself off,...
View ArticleConnecting a MLNX-en card to a Cisco Nexus switch, how to?
We're starting to test out a number of 100g options. While our "Mellanox End-to-End Ethernet Connectivity 100G Bundle" is on order and hasn't arrived yet, we wanted to connect a MCX416A-CCAT NIC to our...
View ArticleRe: rdma_cm belong to kernel which is not a part of MLNX_OFED. how to fix that?
Alexander, could you please elaborate on what you did? Having the same problem.
View ArticleCan you use the SFP+ Adapters for FC?
Will SFP+ Adapters such as the MT 26448 recognize FC SFPs 1,2,4,8gb?
View ArticleRe: mellanox u-boot command prompt password
Hi Lee, Let me know if it's still relevent as I saw you opened a ticket ( I believe it's you as it's the same questions) with our support team.
View ArticleMellanox Support and Professional Services Newsletter Technical Videos - Your...
Dear distinguished Community members, As most of you probably know, every month we release the Mellanox Support and Professional Services Newsletter.At the top of the newsletter, we usually include a...
View ArticleClik here to view.
Re: Configuring mgid in partitions ( windows + opensm )
Hi, opensm version that comes with WinOF driver is older (3.3.11) then the one comes with MLNX_OFED for Linux. the winof version doesn't support the MGID static definition. also - the opensm that...
View ArticleClik here to view.
Re: mellanox u-boot command prompt password
Thank you for following up, I have contacted the Mellanox support team. They suggested me upgrading the mlnx-os with intermediate versions prior to upgrading to the latest. I am trying this out....
View ArticleRe: How to build openvswitch with dpdk for ConnectX-3 NICs?
I've just installed OVS it with DPDK2.2 and ConnectX-4 and it worked fine (at least basic VM connectivity functionality, including DPDK vhost-user).Are you still having troubles with it? you do not...
View ArticleRe: Mellanox Support and Professional Services Newsletter Technical Videos -...
Hi Eyal PSorry if this offtop, but: Thank for video. I found interesting video, but (in my opinion) it's too much forbeginners.It maybepossible toadd more interesting videos to (for example):- are...
View Article