hi
yes ive been very carefull not to adjust any commands saved in env
those commands all work.
switch is a SX6012 or SX1012... 12 port FDR
the firmware is ok, and i can query the switch from IB, and get ports up using opensm on linux host ok
Switch : 0x0002c90300ad6280 ports 12 "SwitchX - Mellanox Technologies" base port 0 lid 2 lmc 0
just seems to have corrupt boot partitions.
| Vendor | : Ty : # : Sta : LID : LMC : MTU : LWA : LSA : Port GUID | : Neighbor Port (Port #) | |||
| Mellanox | : SW : 00 : | : 0002 : 0 : | : | : | : 0002c90300ad6280 : |
| Mellanox | : SW : 01 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 02 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 03 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 04 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 05 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 06 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 07 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 08 : ACT : | : | : 4096 : 4x : 10 : 0002c90300ad6280 : 00237dffff94d2e5 (01) | ||
| Mellanox | : SW : 09 : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 0A : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 0B : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : | ||
| Mellanox | : SW : 0C : DWN : | : | : ??? : ??? : ???? : 0002c90300ad6280 : |
------------------------------------------------------------------------------------------------------
| HP | : CA : 01 : ACT : 0001 : 0 : 4096 : 4x : 10 * 00237dffff94d2e5 * 0002c90300ad6280 (08) |
------------------------------------------------------------------------------------------------------
Also boot of uboot shows
U-Boot 2009.01 SC_PPC_M460EX SX_3.2.0330-82 ppc (feb 27 2013 - 12:13:04)
Security/Kasumi support
In theory, one should beable to copy using mem command from FF40000 or FF60000 on a working switch > TFTP.
I could then download that image file and get the switch to work. Once i figure out where to copy the .img file Mellanox have provided. (the inline firmware image for mlnx-os update command, i should beable to figure that out from the kernel once its running).... not to repeat myself, but to be clear. The current image files on each of the 2 partitions are corrupt. thus i cant boot a linux Kernel.
Anyone willing to boot to u-boot and download a copy for me. once i have it i can copy it to FF400000 and FF600000 boot partitions, hoping the partitions are ok.
Cheers